Jump to content Jump to navigation

Select language

Dowelmaster – dowel gauge for wood joints

Drill gauge for perfect corner, T-butt and edge-to-edge joints in boards/wood

Dowelmaster – dowel gauge for wood joints

for making perfect edge-to-edge, corner and T-butt joints with dowel pins with 6, 8, 10 mm Ø
suitable for boards with a thickness of 12–30 mm, adjustable without tools
Guide bushes and integrated stop pin for error-free positioning of the drill holes

Product details

Product description

With the dowelmaster from wolfcraft, you can make perfect dowel joints at the first go even without previous knowledge. Align drill holes for corner, T-butt and edge-to-edge joints without any errors using the adjustable stop, three integrated drill guide bushes for round dowel pins and two centring bolts. The high-quality, impact-resistant plastic design and the steel drill guide bushes for 6, 8 and 10 mm dowel pins ensure outstanding stability and high durability. With its ergonomically shaped handle, the dowelmaster rests comfortably in the hand, making it a fast drill gauge for almost every work situation.
Face drill holes and edge-to-edge joints
Adjust the drill bit depth stop to the board thickness and dowel length (you do not need additional tools for this). Place the dowelmaster on the face edge of the board and secure it between the two centring bolts. Now you can drill into the exact centre of the face side of the board. For edge-to-edge joints, clamp both boards to the workbench. Push the dowelmaster with the guide slot over the inserted dowel pin in the first board and drill through the bush.
Corner joints
For corner joints, start by drilling all the holes in the face side as described above. Glue the dowel pins into the face holes and then adjust the stop of the dowelmaster to them. To do this, guide the dowel pin into the appropriate bush, align the stop with the side of the board and secure the position using the adjusting screw. Then lay the face board on the undrilled board. The dowelmaster accommodates the dowel pin in the guide slot. You can start drilling once the stop is seated firmly against the lower board edge.
T-butt joints
The wolfcraft dowelmaster makes short work of T-butt joints too. Once you have drilled the first board on the face side and the dowel pins are firmly glued in place, start working on the counterpart. Draw the middle of the bottom on the side board and clamp the bottom with the already glued dowel pins 4 cm away from this line. Push the dowelmaster with the correct guide slot over the dowel pin and drill through the bush on the top of the dowelmaster. Now the boards are ready to be glued.

Properties

drilling template with three guide slots arranged at right angles and drill guide bushes for properly aligned dowel holes
special geometry for edge-to-edge, corner and T-butt joints
adjustable stop with fixing screw for exact alignment with the workpiece without the need for tools
high-quality plastic design and steel guide bushes for stability and durability
ergonomically shaped handle and high clamping force for comfortable use
versatile, can be used for boards with a thickness of 12-30 mm
high quality "Made in Europe"

Technical data

Product width

90 mm

Product length (depth)

200 mm

Product height

75 mm

Tool area

for 6, 8 and 10 mm dowel pins
for boards with a thickness of 12–30 mm

Videos

Article list

Select Options

Article number	Contents	EAN
4640000	1	4006885464001

Downloads

Data sheets

Brochures

Manuals

P-4640_143204640_PRO_MAN_2023-06.pdf

Compatible with tool

Power Drill

Cordless Screwdriver

Accessories

PID 2905
Dowel Pins

PID 2751
Depth Stop Set for wood drill bits, 3 pcs.

PID 2730
Wood Twist Drill Bit Set With Depth Stop 6 Pcs.

PID 2731
Wood Twist Drill Bit Set With Depth Stop, 2 Pcs.

PID 2755
Depth Stop Set, Universal, 4 Pcs.

Spare parts

If you have questions or want to order a spare part, please contact wolfcraft customer service.
Click here to order spare parts.

Please note the following:

If you have a Dowelmaster with two silver screws to the right and left of the turquoise clamping screw, you will need the angle stop 4640 v.1 (art. no. 116620102).

ID	Name
115981172	Rotary Handle Assembly Group 4640
116620722	Angle Stop 4640
143204640	Manual 4640 (old no. 116300246)